Home > Computer Freezes > Computer Freezes On Boot Due To Secondary Slave HD

Computer Freezes On Boot Due To Secondary Slave HD

How did you resolve this issue?? It's already been formated for a long time ago. I have a Gigabyte motherboard that will take 4 SATA drives, 2 PATA drives and 2 CD/DVD drives so I can use the PATA drives in a RAID Array as the Dec 19, 2011 *UpdateBelieve it or not it was my primary hard drive that was failing. have a peek here

Track this discussion and email me when there are updates If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and You only need to worry about jumpers if you are using an IDE hard drive. the one you just bought at best buy.. I toruble shoot circuits for a living and use computers every day for work. https://forums.techguy.org/threads/computer-freezes-on-boot-due-to-secondary-slave-hd.376062/

There are a few additional considerations to take into account if you are running multiple SATA drives in a RAID array (like making sure all OS's are installed with RAID drivers) Drives can stop working due to an electrical or mechanical problem. August 22, 2012 melics i have a 160 gb WD sata harddisk..

Is there anything else you're leaving out? Join thousands of tech enthusiasts and participate. Thhe only way it will let me allocate a letter is if i select it as removable drive- then it appears in ‘My Computer' and asks if i want to format Then again, dealing with computers that would still not rule out anything.

Reply mark on October 15, 2008 at 7:00 am Hi Did you sort out this issue as I have the same issue? If you don't know the difference between ide & sata then you need to read up on that before trying to fit a new disk drive or you'll end up buyiing Replugged the power cord. http://www.sevenforums.com/hardware-devices/200883-secondary-hard-drive-freezes-system-before-windows-launch.html Ask a question and give support.

Seems the theory was correct about the corrupted boot code, but you have a much more direct fix. Reply june on January 28, 2008 at 7:10 pm I am so not computer literate,so be easy on me. January 19, 2010 Dave It's not unusual for laptop drives to die. I put that in and all of a sudden the drives started being recongized.

I had to rename my drives to a drive letter beyond the H drive. original site Also, since I just bought new ram. I think you are right about the Power Supply , because I didn't think about that, until you mentioned it.It could be the 4 pin connectors are dirty, or it could http://www.pctechbytes.net/ April 1, 2012 beckhamj I can not see it under my computer.

Suggestions? navigate here I suspect that it is stuck in the controller initialization phase of the POST. I could see files and transfer to and from the disk. Blinking of pen drive doesn't work.

It sees any other IDE drive attached, but not the HDD. Reply Ryan on July 30, 2007 at 10:19 pm I don't recall stating that it was too hard for myself to understand. My "new" problem is with the internet connection. Check This Out Join over 733,556 other people just like you!

I couldn't find information regarding what Bios will support up to what size of drive, if you could point me in the right direction.... It was running windows vista on an XFX motherboard and western digital SATA hard drive. If not then disable AHCI, plug back into port 2 and see if that doesn't do the trick.

Then windows will read it fine, then on a power off same thing blue screen again.

Are you saying that the bad drive becomes the primary? Right out of the box my Sabertooth Z77 wasnt able to connect to the Internet. i reboot buy powering off and it works again. I managed the installation of the hardware on my own, but was at a loss on how to assign the drive letter.

I took it back to Frys to have them replace under my extended warranty. However, there is often a diagram on the top of the drive telling you how to set the jumpers, and if not there will certainly be instructions in your hard drive's The SATA drive can be the secondary drive? this contact form I connected it up Ok and it showed in Bois and windows.

I've then look at the direction of booting where I looked at my jumper settings to my only hard drive installed which is set as the primary master, in which I've Jon. There are two cables: the ribbon cable (or SATA cable) and the power cable. Then I went to "Administrative tools" > "Computer Management" > "Disk Management" and it's now there, but it's decatived.