Home > Computer Won 39 T > Computer Not Booting Up

Computer Not Booting Up


Find Solutions, ask questions, and share advice with other HP product owners. I switched my video card with one from another desktop and it didn't change anything. very thankful to you Report Arash- Jul 26, 2009 at 02:52 AM Hi Ashkay, HOwru mate I need ur help Actually I started my PC today morning and it said "Power I put the new HDD in and it worked for a few hours, it actually let me install windows and a few other things before it started to freeze again. http://codecreview.com/computer-won-39-t/computer-is-not-booting.html

Press and hold the power button for five seconds. Your computer might be different. Replacing a laptop screen is possible, but difficult, and screens can also be costly. Follow the on-screen instructions to restore the computer to a date and time when it started up correctly. http://ccm.net/forum/affich-27227-computer-powers-on-but-does-not-boot

Computer Not Powering On

If it does not charge then either the battery is faulty or there is a problem with the motherboard. If you have recently installed or replaced any components, such as adding more memory or a larger hard drive, do the following: Remove and then reseat any newly replaced components to Apart from high powered power supplies which have a knob to regulate the fan's speed but still the fan itself cannot decide to change its speed by itself.

Cleaned the 128's again put them back in and powered on again and still no monitor. Common actions to resolve no power issues If the computer does not start, the LED lights do not glow, and the display is black, you can perform one or more of The computer can usually be restarted by turning the power off and then on, but ignoring the error message does not resolve a recurring problem. Computer Won't Boot Windows 10 The system info is: Intel Core 2 Quad Q6600 Processor Asus P5N-T Deluxe 780 SLI motherboard 2 x 2GB Kingston RAM BFG 8800GTS OC 320MB Video Card (2 x DVI) w/aftermarket

Step 2: Disconnect and reconnect the hard drive cable (Desktops) Use the following steps to remove and reseat the hard drive cables: caution: This product contains components that can be damaged Computer Won't Boot Windows 7 The first step to determine what you'll need to do is to try to turn the computer on. 2 Click one of the following links based on what happens. Go under Boot Settings/ (for some models you need to go to Advanced Options to find Boot Settings) Make sure that the first boot device is your H.D.D. The guy told me that sometimes the computer (Windows) will view those open card reader slots as an extra hard drive and will wait for a response of some sort.

Complementary Content MESSAGES LOG IN Log in Facebook Google Email No account yet? Pc Wont Boot To Bios That will do the same thing with an installed PSU. It powers back on now and hdd spins up but no video at all, no beep, no POST, it just sits there and makes a "dial tonish" sounding noise from the Search for and remove any virus or malware.

Computer Won't Boot Windows 7

Under the Main menu, you should see the names of your CD-ROM and DVD-RW Drives. Please help me as this is my only computer and I need it for work. Computer Not Powering On Disconnect all non-essential devices such as printers, scanners, external hard drives, and similar devices. Computer Won't Boot Up Black Screen You will have to wait a few moments while the necessary files load. 3 Log in with your administrator account.

I removed the modem which I have no use for (and you said could be the source of this issue) and also removed the ram and ran an eraser off a http://codecreview.com/computer-won-39-t/computer-booting-problems.html While I have some pretty good and basic knowledge, based mostly on experience and learning from places like this site -- I certainly do not consider myself a geek by HTG Computer does not start. If this also does not work then you need to purchase another memory card because if the above fails then you know this one is faulty. Computer Has Power But Wont Turn On

Thanks a ton for helping me, too. Immediately press the F2 key repeatedly, about once every second, until the HP PC Hardware Diagnostics UEFI screen is displayed. Working from the back of the plug where the wires come out, use a bare paperclip to short between the green wire and one of the neighboring black wires. http://codecreview.com/computer-won-39-t/computer-not-booting.html Notice that you do not need keyboard, mouse, monitor, or drives to successfully POST.At this point, if the system doesn't work, it's either the video card or an inadequate PSU.

I hope you did not turn on the system when you placed the memory card with only 1 notch. My Computer Wont Turn On And Beeps I took the 2 memory sticks out( is that what you mean by VGA cards?) cleaned both sides on the copper pins with an eraser. Figure : Panel removal (your model might look different) Pull out, then press down on the holding clips that retain the memory modules.

wikiHow Contributor Try installing another OS (operating system) from a CD, following the installation process on the CD/DVD.

Best wishes! Voer de volgende stappen uit als uw desktopcomputer geen stroom krijgt: Controleer of de batterij volledig is opgeladen Verwijder de batterij en koppel de wisselstroomadapter los. Cheers, Craig Report DJ AKSHAY 266Posts Sunday December 21, 2008Registration date April 26, 2010 Last seen - Jun 2, 2009 at 03:32 AM Have you used a new memory card? Laptop Not Booting I then changed the cd-rom to see if that was the problem but the problem remains.

This is to verify if the adaptor is giving proper voltage. This is what I'm getting: -laptop is plugged in the mains, I press the power button diodes turn on as normally, the cpu fan spins for 5 seconds then stops, no Als u een desktopcomputer hebt met een monitor met eigen voeding, zorg dan dat het aan/uit-lampje van de monitor aangeeft dat deze is ingeschakeld. navigate here help?

Perform Memory and Hard Drive diagnostic tests If there is power to the notebook, you may be able to access the EFI or the BIOS to run memory and hard drive Cost me $75 for that. Report Dara› DJ AKSHAY - Aug 5, 2009 at 11:21 AM DJ, you're the best! 4 months ago, I was switching the graphic cards on my PC. So I tried the memory eraser - and yes I worked BUT windows XP showed the opening page but then wouldn't run.

Well, the first thing that might be causing this is your memory card (RAM). To correct this problem, you should remove and reseat the new components. If yes, then your processor is faulty. Best advice I have ever read online.

We can't figure out which motherboard the computer uses. Do you hear the continuous beep sound when you remove the memory card, if not then the problem lies either with the motherboard or with the processor. after all my monitor does plug into it, your help was f*cking great, just need your final advice mate Report Joseph› DJ AKSHAY - Jan 25, 2010 at 06:14 PM when