No beeps or clicks to hint at harddrive failure. I believe if the hard disk is good, you should re-install the Windows. With the display plugged in, press the power button on the display. The motherboard has a green light lit up when the power cord is connected and when the power switch is on. http://codecreview.com/computer-won-39-t/computer-will-not-work-can-not-get-anything.html
I will try eraser trick .I suspect since I hadnot unplugged VGA monitor cable that caused the static electricity as using pc100 (128MB) still wount boot. Notenboom has been playing with computers since he was required to take a programming class in 1976. This resets the electronics on the monitor. How does HP install software and gather data?
Under the Main menu, you should see the names of your CD-ROM and DVD-RW Drives. Search all support All Support Software, Drivers and Updates Troubleshooting How to Product Information User Guides Cancel Example: “Laserjet P1102w driver” or “HP Pavilion 17-f002na will not turn on” Loading Results The computer's fans turn on, the power light comes on but there is no activity happening. Try to see if it supports this capacity of processor that you have got.
It was working fine a couple of weeks ago, but then I turned on & it was not working anymore. What do you notice? It goes through bootup sequence, looks like its going to boot up properly since everything lights up and disk drives work. Computer Won't Boot Windows 7 A lot was skeptical that the eraser thing would work but your the man I really need my pc for school and can't afford a new one at the moment,thanx a
And thanks in advance. Computer Won't Turn On So, the way that I understand it, is the the motherboard or processor is the issue. caution: This product contains components that can be damaged by electrostatic discharge (ESD).
If the display is still blank, continue to the next section.
I press the power button, see my power light coming up, I hear everything starting: fans, cd-drive,.... My Computer Wont Turn On And Beeps Safe Mode restart then an earlier restore worked for me. I have tried all of this but I don't got my pc started. As silly as it sounds, I've had some very embarrassed people get back to me when I've suggested that they check the power plug.
That is the part which come into contact with the internal pins in the memory slot on the motherboard. http://support.hp.com/us-en/document/c03518095 Actually when I turned on, it took a long time to get to display & then window was also working weird, then I restarted a couple of time & I though Computer Not Powering On Reply Mark Jacobs (Team Leo) December 2, 2016 at 2:20 pm Your question is very similar to the title question of this article. Laptop Will Not Turn On Regards, ken Report sruman- Jan 15, 2009 at 05:29 AM Ok, I have the same problem.
If possible, move the computer to a clear, flat, stable work surface over an uncarpeted floor. http://codecreview.com/computer-won-39-t/computer-doesn-t-work.html Reply to melvinmax10 rdc85Jan 6, 2015, 5:30 AM I mean for OP Bruce20.. By the way, when I turned on it acted a little weird before going dark. Report DJ AKSHAY 266Posts Sunday December 21, 2008Registration date April 26, 2010 Last seen - Jan 16, 2009 at 04:38 AM On your motherboard, there are 4 pins from your power Computer Has Power But Wont Turn On
It was working fine a couple of weeks ago, but then I turned on & it was not working anymore. I attached the main SATA cable to the other hard drive in an attempt to get VISTA installed on that drive. Report DJ AKSHAY 266Posts Sunday December 21, 2008Registration date April 26, 2010 Last seen - Jan 20, 2009 at 02:19 AM Send me your e-mail address and I'll send you the weblink I removed hard disk & DVD rom & changed their power cords, but no use. 5).
RESET CMOS, REMOVING MEMORY, UNPLUGGING ALL DEVICES, REMOVING CMOS BATTERY, TRIED POWER SUPPLY IN ANOTHER SYSTEM AND IT WORKED, TRIED ANOTHER MEMORY, but nothing happened. Computer Won't Boot Windows 10 Computer opens to a blue "Choose an option" screen If your computer starts and a blue Choose an option screen displays on the screen, see Step 6: Refresh or reset your To adjust disk space for System Restore, type ‘create restore’ in the Start search box and press Enter when Create a restore point is highlighted.
Monitor won't detect/display anymore. just removing the RAM and placing it again did the trick :) GR8! Press the Shift key while you click Restart. Computer Won't Start Ask the community!
If this works then your processor is good. Is there any way I can determine if it is definitely the MB, or did a wire come loose during shipping? If the new display works, the original display or its cables might be faulty. check over here note: If a component fails a test, write down the information so you have it available when you contact HP Support.
Then,nothing else. Can someone help me? If the computer fails any of these tests, it will stop the start-up process. If you are like me and none of those work what I did was I changed the PCI port location and moved it to a different motherboard.
Step 7: Disable power settings in the BIOS If Windows was recently upgraded, Windows might be starting up into a Power Saving state and producing the blank screen before it loads. Report tinker- Jan 23, 2009 at 04:35 PM Thank you. Reinstall the hard drive, then turn on the computer. If it is amber, the display has adequate power, but is not receiving a display / video signal.
After I got it working with only 1 ram installed, I plugged in the other and it was still working. Reply to joseph santos silaslenihanApr 1, 2015, 12:18 AM I read all these reviews and tried almost any one of them and it didn't work. I removed hard disk & DVD rom & changed their power cords, but no use. 5). The screen is blank.
So I tried the memory eraser - and yes I worked BUT windows XP showed the opening page but then wouldn't run. What do you notice? Two things: 1. Reply to Garry_6 jaymar_1Jan 30, 2016, 7:27 AM Garry_6 said: my problem is the same.
Turn on the computer.