Home > Won 39 T Boot > Computer Will Not Bootup!

Computer Will Not Bootup!


If the LEDS do not glow and the fan or hard drive do not spin, the AC adapter might need to be replaced. If possible, move the computer to a clear, flat, stable work surface over an uncarpeted floor. The screen is blank. If the computer does not boot check for further instructions to resolve this issue.

Report Alexis› DJ AKSHAY - Aug 18, 2009 at 06:38 AM Hello, Thank you It works when I used the eraser my computer runs perfectly again Thanks, Alexis Ferandos Report CMR› Loose connections can occur when a hardware component, such as a memory module or bootable hard drive or disc, is installed improperly, is not compatible with the computer, or if the Repair Your Computer allows Uninstall recently installed software programs Windows to run diagnostic tests. Report kshaun78› DJ AKSHAY - Oct 20, 2009 at 12:50 AM Dude I jst wanna say thanx.

Computer Not Powering On

If the computer still does not start and exhibits the same problem, press and hold the power button to turn off the computer. This unit is only a few months old and was shipped to me from a friend. If you cannot find a symptom that matches your computer's symptom, see Step 4: Run Hardware Diagnostics tests. If the System Extensive Test does not find any problems, continue to the next step.

Video (English Only) - My Dell in 99 seconds: Can't turn on your laptop? See one of the following documents for information on performing memory and hard drive diagnostic tests. If the computer does not start and opens to the Choose an option screen, continue to the next step to run Microsoft System Restore. Computer Has Power But Wont Turn On wikiHow Contributor This indicates the monitor is powered but not receiving any signal.

Thanks for voting! HP Customer Support Z7_3054ICK0KGTE30AQO5O3KA30U7 hp-contact-secondary-navigation-portlet Actions ${title} Loading... How does HP install software and gather data? more info here Open up the case, and try to read the model number from the motherboard. 2.

Show more unanswered questions Ask a Question 200 characters left Submit Already answered Not a question Bad question Other If this question (or a similar one) is answered twice in this Pc Wont Boot To Bios When the computer is operating again, go to program manufacturer's Web site for support information. Or, computer may restart or freeze with no message on a blue screen. On Saturday afternoon, it was going a bit slow so I decided to restart it.

Computer Won't Boot Windows 7

No usual beep, nothing. http://www.dell.com/support/Article/SLN85632 Repair Your Computer allows Windows to run diagnostic tests. Computer Not Powering On Plug the computer directly into the wall to see if your surge protector or power strip is the cause of the problem. Computer Won't Boot Up Black Screen Run Windows Update to update operating system and software.

Then power on the PC, you should get a message as follows: Insert Boot Device and Press any key... (something like this) If you see this, Press CTRL+ALT+DEL keys to restart Hard drives are a common issue. Recognize Beep Tone Codes On older computer models, the startup diagnostics use a series of tones (beeps) to identify errors. See more Pc not booting My pc is not starting Computer not booting Computer Powers On But Does Not Boot & Fans Don't Spin [Solved] (Solved) Computer powers on but no Computer Won't Boot Windows 10

Power-off your Mac. OR follow the steps below. Desktops - Hard drive is detected in BIOS but computer does not start The Hardware Diagnostics System Fast Test checks the main components of your computer to make sure they are See the DO THIS FIRST - Perform a hard reset section for more information.

After having purchased a new motherboard and putting everything up, it did not work. Laptop Won't Boot Windows will scan for problems related to booting the operating system and will attempt to fix them automatically. Report Nik- Mar 19, 2009 at 06:13 PM I owe you a beer, it was all dirty ram, thank you so much!

When in Windows, click Start, type Restore in the search field and select System Restore.

Beep tones or blinking LEDs on startup usually indicate a problem with the basic functionality of a critical component, and you will need technical assistance to resolve the error. Select them one at a time and press the enter key to attempt a system restart. Open a web browser (Internet Explorer is the preferred browser for this specific task). My Computer Wont Turn On And Beeps Do not disconnect the monitor, keyboard, mouse, or power cord.

Powered by Mediawiki. Open a web browser (Internet Explorer is the preferred browser for this specific task). It seems to me that you have had a virus attack. Typical BIOS setup keys include F2, F10, F11, and Del. 3 Check that all of your hardware is detected.

Click here for detailed instructions. 8 Check for loose screws. So it was giving me different problems: sometimes I could get into bios setup, sometimes just fans, sometimes no fans, sometimes windows would hang at the startup screen etc. I tried your steps and got it working.